THE KUDOS COLLECTION

Shower Trays

The stunning low profile Connect2 shower tray

Designed, developed and manufactured in the UK by Kudos, the UK’s leading supplier of innovative showering solutions. The stunning looking Connect2 is a uniquely designed shower tray featuring two offset waste positions that ensures an obstruction free connection.

The attractive low profile Connect2 tray will never let a joist get in your way again thanks to the unique offset dual waste outlet. Whether square, rectangular or the new quadrant – whatever the size, the Connect2 tray will allow you to connect the waste fitting without the need to reposition joists or raise the tray onto a plinth.

Features

+  Available in high gloss, slate effect and SR slip, scratch and stain resistant finish

+  Unique design avoids the need to cut joists or lift the tray onto a plinth

+  Guaranteed to work with all standard joist sizes and spans

+  Structural resin bonded stone filler for increased stability

+  Super slim at only 35mm high

+ The reinforced colour matched waste cover is magnetically secured, comfortable underfoot and is easily removed for cleaning

+  Supplied with a dedicated high flow waste, rated to 35 litres per minute

+  Covered by the KUDOS Lifetime Guarantee

Slate Effect Shower Tray

Slip Resistant Shower Tray

A revolution in shower tray design

The unique design of the Connect2 tray ensures obstruction free waste connection irrespective of joist position or direction*.

Connect2 trays are supplied with a high flow waste and a blanking plug secured with solvent weld (not supplied) to block the unused waste hole.

Connect2 trays are supplied with a stylish colour matched linear waste cover, magnetically secured and reinforced for comfort and stability underfoot

*based on industry standard of 400/450/600mm increments as outlined in the NHBC standards 2018

Whether square, rectangular or the new quadrant – whatever the size, the connect2 tray will allow you to connect the waste fitting without the need to reposition joists or raise the tray onto a plinth.

Where joists run parallel to the width of the tray, at least one hole will always be clear.

Where joists run parallel to the length of the tray and both holes are obstructed, simply turn the tray 180°. The unique offset position will ensure both will become free.

With the unique connect2 design even Quadrant and the Kudos unique Full Curve shape trays has the ability to avoid joists.

Waste Locations

Square & Rectangular shower trays
Position of waste holes relative to the centre of each tray.
All sizes: A – 95mm B – 100mm

Quadrant & Full Curve shower trays
Position of waste holes in relation to the 90° angle corner.
All sizes: A – 336mm B – 142mm C – 275mm

For complete peace of mind we recommend the use of
Flexi-Seal when installing all Kudos Shower Trays

THE KUDOS COLLECTION

IF YOU NEED ANY INFORMATION ON A KUDOS PRODUCT

Download brochures and fitting instructions for all KUDOS products here.

Kudos products are available from Plumbers Merchants and Bathroom Specialists throughout the UK. Find your nearest stockist here.

Complete your Product Registration Form here to activate your KUDOS Guarantee.